Call
Select Menu > Settings > Call and from the following:
Call divert — to divert your incoming calls (network service).
You may not be able to divert your calls if some call barring
functions are active.
See "Security", p. 34.
Anykey answer — to answer an incoming call by briefly
pressing any key, except the power key, the left and right
selection keys, or the end key
Automatic redial — to automatically redial the number if a
call fails. The phone tries to call the number 10 times.
Voice clarity — to enhance speech intelligibility, especially
in noisy environments
Speed dialling — to dial the names and phone numbers
assigned to the number keys (2-9) by pressing and holding
the corresponding number key
Call waiting — to have the network notify you of an
incoming call while you have a call in progress (network
service)
Call dur. display — to display the duration of the call in
progress
Summary after call — to briefly display the approximate
duration after each call
Send my caller ID — to show your phone number to the
person you are calling (network service). To use the setting
agreed upon with your service provider, select Set by
network.
Outgoing call line — to select the phone line for making
calls, if your SIM card supports multiple phone lines (network
service)
Phone
Select Menu > Settings > Phone and from the following:
Language settings — to set the language of your phone,
select Phone language and a language. To set the language
of your phone according to the information on the SIM card,
select Phone language > Automatic.
Memory status — to check the memory consumption
Automatic keyguard — to lock the keypad automatically
after a preset time delay when the phone is in the home
screen mode and no function has been used
Security keyguard — to ask for the security code when you
unlock the keyguard
Sensor settings — to activate and adjust the tapping
function
Voice recognition —
See "Voice commands", p. 33.
Flight query — to be asked whether to use the flight mode
when you switch the phone on. With the flight mode, all radio
connections are switched off.
Phone updates — to receive software updates from your
service provider (network service). This option may not be
available, depending on your phone.
See "Software updates
over the air", p. 34.
Network mode — to use both the UMTS and the GSM
network. You cannot access this option during an active call.
Operator selection — to set a cellular network available in
your area
Help text activation — to select whether the phone shows
help texts
© 2010 Nokia. All rights reserved.32
To Next Page
Loading...
