Nokia Comm Band Pro - Pair and Connect with Bluetooth; Pairing with the device; Pairing mode

3 4
EN EN
3. Pair and connect with Bluetooth
3.1 Pairing with the device
3.1a Turning on and pairing: Press power button 2 seconds to turn ON. When
the LED indicator light ashes blue and red alternately the headset is
ready to connect with your Bluetooth
®
device.
3.1b Connecting with your Bluetooth device: Turn on Bluetooth in your device
and choose “Nokia CB-301” from the Bluetooth menu to connect.
During the connection process the LED indicator light on the headset will
ash blue and red alternately.
The LED indicator light will ash blue every 10 seconds when the headset is
successfully connected via Bluetooth.
3.2 After the initial pairing, the headset will automatically connect with your
Bluetooth device whenever it is powered on.
3.3 The headset will automatically power o if there is no Bluetooth
connection within 5 minutes.
3.4 Pairing mode
Nokia CB-301
1/10 secs
i) Turn o headset
(Press and hold power button for 5 seconds.)
ii) When the headset is turned o. Press and hold power button
for 5s for pairing mode.
iii) When the LED indicator light ashes blue and red alternately, the headset
is ready to connect with your Bluetooth device.
The headset will automatically power o if there is no Bluetooth connection
within 5 minutes.
4. Multipoint connection
The headset can connect to two devices and enable to answer call on either
device.
4.1 Pair devices separately (see 3.4).
i) Pair with the rst device and disconnect.
ii) Pair with the second device.
iii) On the rst device, reconnect to headset.
4.2 Your headset will monitor both devices and you can answer to call from
either one.
5 secs
5 secs