Copyright 1995 – 1999 Nokia. All right reserved. 2(6)
6. click install and wait until the Operation In Progress dialogue box is finished. You may install other
drivers as needed, then disconnect the Nokia 9110 Communicator from the PC.
Note: You may also install drivers to the communicator using Nokia Server software.
2. Correct settings for the Nokia 9110 Communicator
The Nokia 9110 Communicator printing connection type must be set to infrared.
From System application, select Settings:
Change Print settings and select Connection type to be Infrared
Then close print settings.
To Next Page
Loading...
