EasyManuals Logo

Nokia E60 Network Guide

Nokia E60
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Defining WLAN connection settings
8
Copyright © 2006 Nokia. All rights reserved.
point have a check mark next to them. To not use a plug-
in, select Options
Disable.
To edit the EAP plug-in settings, select Options
Configure.
To change the priority of the EAP plug-in settings, select
Options
Raise priority to attempt to use the plug-in
before other plug-ins when connecting to the network
with the access point, or Options
Lower priority to use
this plug-in for network authentication after attempting
to use other plug-ins.
The available options may vary.
Creating a WLAN Internet Access
Point for an ad hoc network
1 Select MenuToolsSettingsConnection
Access points.
2 The list of existing access points is shown. Press
Options
New access point to create a new Internet
access point.
To use an existing access point as a basis for the new
one, select Use existing settings. To start with an empty
access point, select Use default settings.
3 Define the following settings:
Connection name — Type a descriptive name for the
Internet access point, such as Office ad hoc
connection.
Data bearer — Select Wireless LAN.
WLAN netw. name — To enter the service set
identifier (SSID), that is, the name that identifies the
specific wireless LAN, select Enter manually. The
name must be exactly the same as in your Wi-Fi
router. If you do not enter the SSID here, you are not
able to connect to networks that use a hidden SSID.
To select the network from the wireless LANs in
range, select Search for netw..
Network status — Select Hidden if the network you
are connecting to is hidden, or Public if it is not
hidden.
WLAN netw. mode — Select Ad-hoc. In this mode,
devices can send and receive data directly with each
other, and no wireless LAN access point is needed.
WLAN security mode — You must select the same
security mode that is used in the wireless LAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
Nokia_E70_Using_WLAN_en_1.fm Page 8 Monday, June 5, 2006 6:12 PM

Other manuals for Nokia E60

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia E60 and is the answer not in the manual?

Nokia E60 Specifications

General IconGeneral
BrandNokia
ModelE60
CategoryCell Phone
LanguageEnglish

Related product manuals