BlackBerry Connect Email Set Up Guide
BlackBerry Connect Email Set Up Guide
With BlackBerry Connect, you can wirelessly access your corporate and personal email on your
Nokia E62. Email messages are automatically delivered and you can send, receive, and reply to
emails directly from your device. This guide explains the two ways to use BlackBerry Connect
on your Nokia E62.
• BlackBerry Enterprise Server — Provides corporate users with wireless access to
Microsoft Exchange or Lotus Domino email, calendar, and corporate directory. Check with
your company's IT department to verify that you have authorized access to your corporate
BlackBerry Enterprise Server.
• BlackBerry Internet Service — Provides wireless access to Internet (ISP) email accounts
such as POP3 or IMAP4.
You can set up and use BlackBerry Enterprise Server or BlackBerry Internet Service or you can
set up and use both for access to your corporate and personal mail.
Before you begin
Before you begin
You will need to do the following to complete the set up of your BlackBerry Connect account:
1. Complete the initial Nokia E62 device set up using the Getting Started Guide.
2. For a BlackBerry Enterprise Server account:
a. Obtain authorized access to your corporate BlackBerry Enterprise Server.*
b. Locate the Getting Started CD-ROM and a PC with a CD-ROM drive.
3. For a BlackBerry Internet Service account:
a. Find your personal Internet Service Provider (ISP) email account name and password.
b. Find your BlackBerry Internet Service email and password.
c. Find the PIN and IMEI of your device. When BlackBerry is installed on your device:
• Select the Menu key ( ) > Messaging > Options > Settings > Email > BlackBerry then
• Navigate the joystick to the right to the Device info tab ( ) to find the PIN and IMEI.
* Contact your company’s IT help desk.
Please complete all set up steps listed in this guide.
All screen images are simulated.
You will need to have BlackBerry Connect service to enable BlackBerry email. Contact Cingular at
1-866-CINGULAR (1-866-246-4852) to activate a BlackBerry Connect rate plan if you have not already done so.
Installing the BlackBerry client on the device
Installing the BlackBerry client on the device
To begin the BlackBerry Connect installation directly from your Nokia E62, follow the steps below.
1. Power on your device to connect to the mobile network (if not already on). You will know that
your device is connected to the network when you see the signal bars ( ) in the left-hand
corner of the device display. Your device needs to be in a network coverage area to continue.
2. Press the Menu key ( ) and select > Email > E-mail inst. to open the email installation
application. Read the application information.
3. Select Options > Installable clients.
4. Scroll down to BlackBerry, then select Options > Install.
5. Fill in the required information (location, name, mobile number, email address),
accept the End User Software Agreement and select Send.
6. The file will begin to download automatically and download details will display on
your device (fig. 2.1 and 2.2).
Installing the BlackBerry client on the device cont’d.
Installing the BlackBerry client on the device cont’d.
After the file has been downloaded to your device, continue with the BlackBerry Connect installation:
1. Select Yes when asked if you want to install BlackBerry.
2. Select
Continue after you read the application information.
3. You will see an “Installation Complete” notice when BlackBerry has finished installing on
your device.
4. Select Options > Exit to close the browser.
After you have installed the BlackBerry file, BlackBerry Connect will launch automatically. You are
ready to continue when both the Data Services ( ) and BlackBerry ( ) icons are visible on the
device display. If the icons do not appear after a few minutes, you can manually enable BlackBerry
Connect by following these steps:
1. Press the Menu key ( ) and select Messaging > Options > Settings.
2. Select Email > BlackBerry.
3. In the General tab ( ), set BlackBerry service to On.
4. Press Back or select Options > Exit to exit settings.
Note: If BlackBerry Connect is turned off and the BlackBerry icon is not visible, you will not be able
to send emails. You may save them to the drafts folder until BlackBerry Connect is turned back on.
fig. 2.1 fig. 2.2
To Next Page
Need help?
General
Weight and Dimensions
