1. Product Overview
The Nokia ONT G-2426G-B is the solution for home networking that is
delivered by Gigabit Passive Optical Network (GPON). The device has
built-in concurrent dual-band Wi-Fi® 802.11 b/g/n/ax and
802.11ac/ax networking with triple
play capabilities that include voice,
video and data. The G-2426G-B
supports Wi-Fi 6 and Wi-Fi
EasyMesh™, to create a whole home
coverage mesh network. This
coverage can be expanded at any time
by installing additional Wi-Fi
EasyMesh-capable beacons to ensure
seamless roaming throughout the
home. The G-2426G-B includes the
Nokia WiFi Mesh Middleware which
ensures the best possible Wi-Fi
performance. The end-user
experience is enhanced by the service
provider’s Wi-Fi management
capabilities in the cloud and intuitive
home user support using the Nokia
WiFi mobile app.
A. Technical Specifications
Height: 226 mm (8.9 in)
Width: 160 mm (6.3 in)
Depth: 85 mm (3.3 in)
Weight: 0.71 kg (1.56 lb)
Power consumption:
• Standby mode: 6.7 W
• Typical mode: 10.8 W
B. Manufacturer Information
For Products Purchased in EU/EAA Countries
The products are manufactured and imported by Nokia Solutions and
Networks Oy.
Karakaari 7, 02160 Espoo, Finland.
Nokia is a registered trademark of Nokia Corporation.
For Products Purchased in the United States
The products are imported by Nokia of America Corporation.
• Offices: https://www.nokia.com/contact-us/offices/#north-
america
• Support: https://www.nokia.com/networks/business-support/
• Other contacts: https://www.nokia.com/contact-us/
Please contact your Internet Services Provider in case of questions
on the product.
2. Safety Guidelines
ALWAYS READ THE PRODUCT GUIDE BEFORE SET UP OR USE OF THE
PRODUCT. IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF
WITH THE PRODUCT GUIDE AND WARNINGS, AND TO USE A PRODUCT
PROPERLY. CONTACT YOUR INTERNET SERVICES PROVIDER FOR
FURTHER QUESTIONS.
Warning - Risk of electric shock or fire
Connect the Product power adaptor or cord to the right supply
voltage (for example, 230V in Europe, Turkey, Ukraine, 120V AC
in US, 230V in Australia and New Zealand, 230V in South Africa, 220V
in Russia, Morocco).
The socket-outlet shall be easily accessible.
Pay attention to the power load of the electrical outlet and possible
extension cord. An overburdened power outlet or damaged cords
and plugs may cause electric shock or fire. Check the power cords
regularly. If you find any damage, replace the cord immediately.
Do not connect the plug into an extension cord, receptacle, or other
outlet unless the plug can be fully inserted with no part of the blades
exposed.
Leave adequate space for heat dissipation to avoid any damage
caused by overheating the Product. Do not cover the Product or its
ventilation holes. Blocking the ventilation holes may cause fire.
Use the power adapter provided with your Product and do not fasten
the power cable to building surfaces. Ensure the cable can move
freely. Do not place heavy objects on the cable.
Do not use the Product outside, and make sure all the connections
are indoors.
Do not install, use, or service this Product during a thunderstorm.
There is a remote risk of electric shock from lightning.
Caution - Potential equipment damage
Follow these recommendations to protect yourself and the Product
from harm:
• Do not look directly at the optical port without protection.
• Do not insert any sharp object into the openings of a Product.
• Do not put the Product near a heat source. Avoid placing the
Product in direct sunlight.
• Do not put the Product in damp or wet locations; for example,
near a bathtub, washbowl, kitchen sink or laundry tub, in a wet
basement, or near a swimming pool. Do not spill any liquid on
the Product.
• Do not touch the Product or its power adapter or cord with wet
hands.
• Do not place the Product on an unstable surface or support.
• Do not place heavy objects on top of the Products.
• Do not use liquid or aerosol cleaners; unplug the Product and
use a soft, dry cloth for cleaning.
• When connecting a PC or other electronic device to a Product,
make sure you use the right cables and connect the device to
To Next Page
Need help?
General
