Need help?Do you have a question about the Nokia G-2426G-B and is the answer not in the manual?
General| Model | Nokia G-2426G-B |
|---|---|
| Category | Wireless Router |
| Frequency band | 2.4 GHz, 5 GHz |
| Maximum Data Rate | 1200 Mbps |
| Ethernet ports | 4 |
| Gigabit Ethernet ports | 4 |
| Ethernet Ports Speed | 10/100/1000 Mbps |
| WAN Port | 1 |
| Weight | 500 g |
| Power Supply | 12V DC, 1.5A |
| Wi-Fi standards | 802.11b/g/n |
| Security Features | WPA3 |
Explains the scope and goals of the documentation set.
Defines the target readers for this document.
Highlights critical safety warnings and explanations of hazard symbols.
Indicates where to find definitions for technical terms used.
Provides a general introduction to new features and changes.
Details specific updates and new features for BBD Release 21.02.
Details safety instructions provided with the ONT customer documentation and equipment.
Explains the purpose and meaning of DANGER, WARNING, and CAUTION boxes.
Lists compliance with electromagnetic compatibility, interference, and electrostatic discharge standards.
Provides guidelines for using approved power supplies and the risks of non-approved ones.
Details ESD sensitivity and precautions for handling ONT equipment.
Classifies the ONT as a Class 1 laser product and discusses laser warning labels.
Specifies storage, transportation, and stationary use conditions for the ONT.
Describes environmental instructions and sample labels related to product recycling and hazardous substances.
Describes compliance of OLT and ONT equipment to CRoHS standard for hazardous substances.
Details storage, transportation, and stationary use conditions according to environmental standards.
Explains compliance with EU RoHS Directive for hazardous substances.
Provides guidelines for the collection and treatment of electronic products at end-of-life.
Details safety instructions provided in customer documentation and on the equipment.
Explains DANGER, WARNING, and CAUTION boxes for safety information.
Lists compliance with FCC, GR-1089-CORE, and ESD standards.
Provides safety instructions for handling laser components and avoiding exposure.
Details electrical safety precautions for ONT installation and operation.
Details ESD sensitivity and precautions for handling ONT equipment.
Specifies environmental requirements for ONT operation and installation.
Introduces the G-2426G-B unit data sheet and its contents.
Provides information on ordering and identifying G-2426G-B indoor ONT models.
Describes the general functionality and features of the G-2426G-B indoor ONT.
Details software features and installation support for the G-2426G-B.
Describes the supported interfaces and their capacities on the G-2426G-B.
Explains the status indicators (LEDs) on the G-2426G-B indoor ONT.
Provides detailed physical, power, and environmental specifications for the ONT.
Lists the capacity for GEM ports and T-CONTs on the G-2426G-B ONT.
Identifies supported performance monitoring statistics for the G-2426G-B ONT.
Illustrates the functional blocks and architecture of the G-2426G-B ONT.
Lists the standards that the G-2426G-B indoor ONTs comply with.
Lists specific considerations and limitations for Package P G-2426G-B ONTs.
Introduces the installation chapter and its contents.
Explains the objective of the installation guide.
Describes the mounting and cabling steps for installation.
Lists items required before starting the installation process.
Lists the necessary tools for performing the installation.
Provides critical safety information and warnings before installation.
Outlines the step-by-step procedure for installing the ONT.
Provides the step-by-step procedure for mounting the ONT on a wall.
Details procedures for connecting supported UPS models to the ONT.
Introduces the ONT replacement chapter and its structure.
Explains the objective of the ONT replacement guide.
Describes the mounting and cabling steps involved in replacement.
Lists items needed before starting the ONT replacement.
Lists the tools required for replacing the ONT.
Provides critical safety warnings before replacing the unit.
Outlines the step-by-step procedure for replacing the ONT.
Introduces the configuration chapter and its contents.
Guides on using the web-based GUI for G-2426G-B in HGU mode.
Introduces procedures for viewing device and connection status.
Introduces network configuration tasks for G-2426G-B ONTs.
Introduces security configuration tasks for G-2426G-B ONTs.
Introduces application configuration tasks supported by G-2426G-B ONTs.
Introduces maintenance tasks supported by G-2426G-B ONTs.
Introduces the RG troubleshooting counters GUI procedures.
Introduces the topic of ONT configuration files over OMCI.
Explains the objective of using configuration files over OMCI.
Describes the configuration file types supported by Nokia ONT R05.02.00 and later.
Provides steps for configuring an ONT using a configuration file over OMCI.
To Next Page
