Nokia G-2426G-B - Configuring SLID; Figure 8-54 SLID Configuration Page; Table 8-44 SLID Configuration Parameters

Configure
a
G
-
2426G
-
B
indoor
ONT
Maintenance
Configuring SLID
Nokia
ONT
3FE-49441-ABAA-TCZZA
June
2021
Issue 1
183
3
Click Save/Apply.
E
ND OF STEPS
8.50 Configuring SLID
1
Click Maintenance→SLID Configuration from the left pane in the GPON Home Gateway
page. The SLID Configuration page displays.
Figure 8-54 SLID Configuration page
2
Configure the following parameters:
Table 8-44 SLID Configuration parameters
Field Description
Current SLID Displays the current SLID.
Enter New SLID Enter the new SLID.
SLID Mode Select a SLID mode from the list.
The default is HEX Mode.