Nokia G-2426G-B - Figure 8-31 Mesh Page; Table 8-26 Mesh Parameters

Configure
a
G
-
2426G
-
B
indoor
ONT
Network configuration
Configuring Mesh
Nokia
ONT
3FE-49441-ABAA-TCZZA
June
2021
Issue 1
149
Figure 8-31 Mesh page
2
Enter the beacon serial number and click Add.
The following information displays:
Table 8-26 Mesh parameters
Field Description
Beacon Serial Number Indicates the serial number of the extender Nokia Wi-Fi beacon device.
Onboarding Status Indicates whether the extender Nokia Wi-Fi beacon associated with the serial number is configured to the
mesh or not. If it is configured then the extender beacon MAC address is added to the Root.
Backhaul Status Indicates the status of the backhaul connection. It represents the backhaul status of Good, Normal, or
Bad values, between the Root Access Point and the extender Access Point.