Nokia G-2426G-B - Table 8-34 Access Control Parameters; Table 8-35 Trusted Network Parameters

Configure
a
G
-
2426G
-
B
indoor
ONT
Security configuration
Configuring access control
Nokia
ONT
3FE-49441-ABAA-TCZZA
June
2021
Issue 1
168
Table 8-34 Access Control parameters
Field Description
WAN Select a connection from the list.
Trusted Network Enable Click to enable or disable trusted network.
ICMP, Telnet, SSH, HTTP, TR-069, HTTPS,
SFTP
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
3
Click Save.
Click Refresh to view the up-to-date information.
4
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
Table 8-35 Trusted Network parameters
Field Description
Trusted Network
Source IP Start Enter a start IP address for the new subnet trusted network.
Source IP End Enter an end IP address for the new subnet trusted network.
5
Click Add.
E
ND OF STEPS