9.2.1 Channels
In this menu you can select the reception tuner installation mode according to your TV signal reception type:
Analogue, Antenna, Cable or Satellite.
Select the mode and press OK to proceed to the tuning.
9.2.1.1 Analogue
Channel scan – Press the OK button to perform the automatic search for Analogue channels. When the
scanning process is nished, press the Back button to return to the previous Menu.
Updatescan – Press the OK button on the remote control to perform the automatic search to update the
channel list. This will either add new channels or update information of current channels.
Analogue manual scan – Press the OK button to manually choose a starting frequency and the direction of
the scan.
9.2.1.2 Antenna
Channel scan - Press the OK button on the remote control to perform the automatic search for DVB-T/T2
channels. When the scanning process is nished, press the Back button to return to the previous Menu.
Updatescan - Previously added channels will not be deleted, but newly found channels will be stored in the
channel list.
Single RF scan - Select the RF Channel by using the Right/Left directional buttons. Signal Level and Signal
Quality of the selected channel will be shown. Press OK to start the scan on the selected RF channel. The found
channels will be stored in the channel list.
Manual service update - This function will start the update of the receivable TV/radio channels manually.
LCN - Set your preference for LCN. LCN is the Logical Channel Number system that organizes available
broadcasts in accordance with a recognizable channel number sequence (if available).
Channel scan type – Set your scan type preference.
Channel store type - Set your store type preference.
Favorite network select: Select your favorite network. This menu option will be active, if more than one
network is available.
9.2.1.3 Cable
Channel Scan: The Smart TV searches for digital and analogue channels that can be received via cable.
Depending on the country, optional DVB-C cable TV providers are oered during the initial installation and are
listed on the Channel scan list screen. If you receive the DVB-C signal from a non-dedicated cable TV provider,
select the option Others. Press OK to start the channel search. In the Channel scan menu, you can select one
of the three channel search options: Full, Advanced, or Quick.
• Full: Automatic search of all available DVB-C channels.
• Advanced: Automatic search of all available DVB-C channels. For this option, it is necessary to enter the
DVB-C provider’s reception parameters, frequency and network ID. With this search option, the channels are
sorted by LCN of the cable providers.
• Quick: Automatic search for all available DVB-C channels. This will search all available cable transponders
with the standard symbols.
Single RF scan: Manual search of DVB-C channels by transponder frequency.
LCN: LCN options for DVB-C channel search.
Channel scan type: Set your scan type preference.
Channel store type: Set your store type preference.
9.2.1.4 Satellite
First, you have to choose which channel installation mode to use.
Channel installation Mode - Preferred Satellite
28
To Next Page
Loading...