Nokia HN24GE320C - Display and Sound

Connected input: View the listed devices connected to the Composite or HDMI connections of your TV. You can
rename the connection or assign an individual device name for specic connections.
Standby inputs: View a list of available HDMI inputs.
Unconnectedinput:View the connections to which no device is connected.
ConsumerElectronicControl(CEC)
With the CEC function of your TV, you can operate a connected device with the TV remote control. This function
uses HDMI CEC (Consumer Electronics Control) to communicate with connected devices. Devices must support
HDMI CEC and must relate to an HDMI connection.
The TV comes with the CEC function switched on. Make sure that all CEC settings are properly set up on the
connected CEC device. The CEC functionality has dierent names on dierent brands. The CEC function might
not work with all devices. If you connect a device with HDMI CEC support to your TV, the related HDMI input
source will be renamed with the connected device’s name.
To operate the connected CEC device, select the related HDMI input source from the Inputs menu on the Home
Screen. Or press the Source button if the TV is in Live TV mode and select the related HDMI input source from
the list. To terminate this operation and control the TV via the remote again, press the Source button on the
remote control and switch to another source.
The TV remote is automatically able to control the device once the connected HDMI source has been selected.
However not all buttons will be forwarded to the device. Only devices that support the CEC Remote Control
function will respond to the TV remote control.
HDMIcontrolOn/O: Allow the TV to control HDMI devices.
DeviceautopowerO: Power O HDMI devices with the TV.
TV auto power on: Power on the TV with HDMI device.
CECdevicelist: View the devices that support the HDMI function and are connected to your TV.
9.3. Display and sound
Adjust Picture, Screen, Sound and Audio output settings.
30