Getting started
7
English
The headset contains the following parts, as shown in Figure 1.
1 - Power key: Switches the headset on and off, or mutes the ongoing call.
2 - Speaker: Relays the caller’s voice.
3 - Indicator light: Displays the current status of the headset. The indicator
light can be yellow, green or red. If the light is yellow, a Bluetooth connection is
active. The green and red lights indicate the status of a call and charging.
4 - Volume control key: Increases/decreases the earphone volume during a call.
5 - Microphone: Picks up your voice.
6 - Answer/end key: Answers or ends the call. This key can also be used for voice
dialling, redialling and switching an active call between the headset and the
compatible phone.
7 - Charger connector
Before you can start using the headset, you must:
• Charge the battery
• Pair a compatible phone with the headset
HS-4W_EN_1st_tab.fm Page 7 Monday, August 15, 2005 11:47 AM
To Next Page
Loading...
