Service Manual Level 1 and 2
Nokia Lumia 900
RM-808, RM-823
Version 3.0
Assembly hints
Fasten the three camera cross screws in the order shown to the torque of 14Ncm. Be careful not to over
tighten the screws. The screw molds might get damaged.
Fasten the seven TORX+ size 4 screws in the order shown to the torque of 15Ncm. Note that screws 4 and
7 must be tightened to the torque of 14Ncm. Be careful not to over tighten the screws. The screw molds
might get damaged.
©2012 Nokia | Nokia Internal Use Only | All Rights Reserved.
To Next Page
Loading...
