Insert the SIM card
Read on to learn how to insert your SIM card into your phone.
Important: Your device uses a micro-SIM card, also known as a mini-UICC SIM card. Use of
incompatible SIM cards, or use of SIM card adapters, may damage the card or the device, and
may corrupt data stored on the card.
Make sure the phone is switched off.
1. Pull the red tab at the top of the phone to easily slide out the SIM tray.
2. Put the SIM in the tray, contact area face up.
3. With the SIM in place, slide the tray back into place until it is fully inserted.
Remove the SIM card
Got a new SIM card? Learn how to remove the previous card from your phone.
1. With the phone powered off, put your fingernail in the gap on the edge of the SIM cover, and pull
the SIM card tray out.
2. Lift the SIM card from the tray.
Switch the phone on
Are you ready? Switch your phone on, and start exploring it.
Press the power key until the phone vibrates.
© 2014 Microsoft Mobile. All rights reserved.
7
To Next Page
Loading...
Need help?
General
