GB 25
Technical specifications
Transmission Standards DVB, MPEG 2
RF Input Modulator Output
Input/output connector IEC female / IEC male
RF input frequency 174-300 MHz & 474-862 MHz
RF input power level 78 to -30 dBm
RF impedance 75
Frequency range Loop through 47-862 MHz
Supported TV systems PAL B/G, I and SECAM
Frequency range RF modulator 471, 25-855, 25
MHz
Output channel CH 21-69
Preset channel 43
Output signal PAL I, G and SECAM
Demodulation OFDM 2k and 8k, QPSK
TV SCART
Video output 1 Vpp (±1 dB) / 75
Audio output 0.5 Vrms / RL >10 k
RGB output Internal RGB
RGB bandwidth 5.8 MHz ±3 dB
Fast blanking output Internal
Status output 0/6/12 V / RL >10 k
Front panel
One LED indicator
External power supply
Input 230 V ± 10% , 50-60 Hz
Power consumption max 11 W
Power consumption
in standby mode
max 2 W
General data
The model code, variant and serial number, are located on
a label on the underside of the receiver.
The Viaccess Conditional Access (CA) System is embedded in
112 T and the Conax CA system in 120 T .
DC power
to the Mediamaster
16 V
Operating temperature +5°C to +45°C
Storage temperature - 40°C to +65°C
Humidity 25 to 75% rel. humidity
Operating distance for
remote control
Circa 10 m
Dimensions (w x d x h) 167 x 165 x 40 mm
Optical TOS-link connector For PCM, DTS and Dolby Digital
Bitstream audio output
signals
Audio decoder MPEG-1 layer I and II
To Next Page
Loading...