Nokia N9 RM-696 - Page 14

Nokia N9 (RM-696)
L1L2 Service Manual
14
Nokia I nternal Use only | Copyright © 2012 Nokia | All rights reserved
V ersion 8.0
15) Use the SS-93 to disconnect the two DISPLAY
ASSEMBLY connectors. Be careful not to damage
the connectors or any nearby components.
16) Remove the DISPLAY ASSEMBLY.
17) Pull out and remove the SENSOR FLEX. Do not
use it again. Discard it.
18) Use the SS-93 to remove the adhesive
remains from the DISPLAY ASSEMBLY.