Nokia N90 - Page 14

nokia
CONNECTING PEOPLE
PAGE 14 (29) Approved 1.0
CMO Operations & Logistics
MGR
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 29.6.2005
17.) Remove the MMC Port Cover.
18.) Lift up the Side Key Assy. Mind the Flex foil.
19.) Unlock the clips of the Retainer Plate.
20.) Separate the Retainer plate from the Side Key
Bezel Assy.
21.) Remove the Joystick Hat.
22.) One screw is located under a flex connector.
Carefully open the flex connector with the SRT-6.
23.) Unscrew 4 screws in the shown order. For
assembly use the red marked order and a torque of 18
Ncm.
24.) Lever up the BB Shield Assy at the guidance as
shown.
Service Manual n90 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.