nokia
CONNECTING PEOPLE
PAGE 20 (29) Approved 1.0
CMO Operations & Logistics
MGR
WW Service Solutions & Development
Bochum / Germany CONFIDENTIAL 29.6.2005
9.3 CAMERA BLOCK
1.) Always protect the window with a plastic film.
2.) Unlock and remove the Battery Cover. Ensure that
no Battery is inserted.
3.) Position the camera part to 90 degrees.
4.) The screws are hidden behind two glued Cosmetic
Layers. Use new ones when reassemble.
5.) Peel up the Cosmetic Layer on both sides.
6.) Release the 4 Torx size 5 screws. The camera
window is located on the left side in this picture. For
assembly use the reverse order and a torque of 16
Ncm.
7.) Important: Mark the correct position before
continue.
8.) Prevent mechanical stress to the cables and the
connectors.
Service Manual n90 Level 1&2 Copyright © 2005 NOKIA Corporation. All rights reserved.
To Next Page
Loading...
