Nokia N97 mini
RM-553 / RM-555
Service Manual Level 1&2
 
16 
Confidential
Copyright © 2009 NOKIA 
All rights reserved
Version 1.0
ISSUE 1
 
25) Now detach the other end of the READER FPC 
fixed to the HEAT SINK ASSY adhesive using the SS-
93. The READER FPC cannot be reused. 
26) Use SS-93 again to detach the HEAT SINK ASSY 
adhesive. Do not use it again. The HEAT SINK ASSY 
adhesive has to be renewed also. 
27) Use the dental tool to remove the two SCREW 
CAPS. Be aware of the sharp point of the dental tool! 
Be careful not to injure yourself! 
28) Unscrew the two Torx+ size 4 screws in the 
order shown. Do not use them again. Discard them. 
29) Start releasing the A-cover assembly with the 
SRT-6 as shown. 
30) Carefully lift up the assembly to gain access to 
the A-COVER ASSY connector. Use the SS-93 to open 
the connector. Be careful not to damage the 
connector or any nearby components!