ActiveSync
Use of the Mail for Exchange is limited to over-the-air
synchronization of PIM information between the Nokia
device and the authorized Microsoft Exchange server.
Mail for Exchange can be set up only if your company has
Microsoft Exchange Server. In addition, your company's IT
administrator must have activated Mail for Exchange for
your account.
Before starting to set up Mail for Exchange, ensure that you
have the following:
• A corporate e-mail ID
• Your office network user name
• Your office network password
• Your network domain name (contact your company's
IT department)
• Your Mail for Exchange server name (contact your
company's IT department)
Depending on your company's Mail for Exchange server
configuration, you may need to enter other information in
addition to those listed. If you do not know the correct
information, contact your company's IT department.
With Mail for Exchange, the use of the lock code may be
mandatory. The default lock code of your device is 12345,
but your company's IT administrator may have set a
different one for you to use.
You can access and modify the Mail for Exchange profile
and settings in the Messaging settings.
67
Messaging
To Next Page
Loading...
