The captured images are displayed in a grid. To view an
image, select the image. To return to the sequence mode
viewfinder, press the capture key.
You can also use sequence mode with the self-timer.
To turn off sequence mode, select
> Single shot.
You in the image — self-timer
Use the self-timer to delay the capture so that you can
include yourself in the image.
To set the self-timer delay, select
> , and the delay
needed before the image is captured.
To activate the self-timer, select Activate. The stopwatch
icon on the screen blinks and the remaining time is
displayed when the timer is running. The camera captures
the image after the selected delay elapses.
To switch off the self-timer, select
> > .
Tip: Select 2 seconds to keep your hand steady when
capturing an image.
Video recording
Record videos
1 To switch from image mode to video mode, if
necessary, select
and video mode .
2 To start recording, press the capture key or select
.
A red record icon is displayed.
3 To pause recording at any time, select Pause. To
resume, select Continue. If you pause recording and
do not press any key within one minute, the recording
stops.
To zoom in or out of the subject, use the zoom keys.
4 To start recording, press the capture key. The video
clip is automatically saved in Photos.
Video recording on-screen controls and indicators
The video viewfinder displays the following:
1 Capture mode indicator
2 Audio mute on indicator
3 Capture icon. Select to record video clips.
4 Video light indicator
5 Recording settings. Select to change settings.
6 Battery charge level indicator
7 Video quality indicator. To change this setting, select
Options > Settings > Video quality.
105
Camera
To Next Page
Loading...
