CONFIDENTIAL 16 (25)
NPE-4 6310/NPL-1 6310i Repairhints
Customer Care Europe & Africa Version 1.0 Approved
SCCE Training Group Date 15.08.2002
© NMP 2002
Checked by:
SCCE Training Group
Approved by:
SCCE
Display too dark/ too bright
When turning on the phone, the display LED´s V300 – V303
(See picture below) shine in different brightness.
This is caused by use of different LEDs. In this case change all LEDs and
assemble the right ones with spare part code 4864293.
Note! When changing the LEDs, first the RF frame has to be removed.
Be very careful when lifting the frame with hot air. A little drift beside
and some small components might be pushed away.
300-V303
To Next Page
Loading...
