Securely mounting a base plate (A) to the
tripod adapter (B) is recommended.
The Device is delivered with the large OZO
Tripod adapter attached.
The large OZO tripod adapter includes 5 x
standard 3/8" tripod mounting hole.
The included alternative small OZO tripod
adapter includes 1 x standard 3/8" tripod
mounting hole.
Changing the Tripod AdapterChanging the Tripod Adapter
Specific force is required to ensure the newly-
attached tripod adapter is securely fixed.
1. Carefully remove the mounted adapter (A)
using an M8 tool.
2. Attach the alternative adapter (B).
3. Apply exactly 20 Nm with a torque wrench
tool and fix securely. Do not overtighten.
Do not replace the M8 screw.
If damaged, always replace with original spare
parts.
Connector Cap RemovalConnector Cap Removal
To Next Page
Loading...