Nokia RM-1020 - Insert SIM and Memory Cards

Insert the SIM and memory cards
Make sure the phone is switched off.
1. At the top of the phone, put your fingernails in
the seam between the screen frame and the back
cover. Do not use any sharp tools, as they may
damage the phone.
2. Place your thumb in the middle of the back
cover and bend the cover to remove it.
3. If the battery is in, lift it out from the upper right
corner.
4. Slide the micro-SIM card into the SIM1 slot with
the metal contact area down.
5. Slide the memory card into the memory card
slot.
6. If you have a second SIM card, slide the SIM2
holder out, place the second SIM on the holder
with the metal contact area up, and slide the
holder back in.