Nokia RM-180 - Additional Safety Information; Operating Environment and Medical Devices

Copyright © 2006 Nokia. All rights reserved.
Troubleshooting
98
Troubleshooting
Q&A
Bluetooth connectivity
Q: Why can I not find my friend’s device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 metres (32 feet) and that there are no walls or
other obstructions between the devices.
Check that the other device is not in hidden mode.
Check that both devices are compatible.
Q: Why can I not end Bluetooth connectivity?
A: If another device is connected to your device, you can
either end the connection using the other device or by
deactivating Bluetooth connectivity. Press , and
select Connect. > Bluetooth > Bluetooth > Off.
Multimedia messaging
Q: What should I do when the device cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error
message: Not enough memory to retrieve message.
Delete some data first. To view what kind of data you
have and how much memory the different data groups
consume,
press , and select Tools > File mgr. >
Options > Memory details.
Q: The note Retrieving message is shown briefly. What is
happening?
A: The device is trying to retrieve a multimedia message
from the multimedia messaging centre.
Check that the settings for multimedia messaging are
defined correctly and that there are no mistakes in
phone numbers or addresses.
Press , and select
Messaging > Options > Settings > Multimedia
message.
Q: How can I end the data connection when the device
starts a data connection again and again?
A: To stop the device from making a data connection, press
, and select Messaging > Options > Settings >
Multimedia message. To ignore all incoming
multimedia messages, select Multimedia retrieval >
Off. After this change, the device does not make any
network connections related to multimedia messaging.
Messaging
Q: Why can I not select a contact?
A: The contact card may not have a phone number or an
e-mail address. Add the missing information to the
contact card in Contacts.