1. Insert the SIM and memory
card
1.Open the SIM and memory card tray: push the
tray opener pin in the tray hole and slide the tray
out.
2.Put the nano-SIM in slot 1 on the tray with the
contact area face down. If you have a second SIM,
put it in slot 2.
3.If you have a memory card, put it in the memory
card slot.
4.Slide the tray back in.
Use only original nano-SIM cards. Use of incompati-
ble SIM cards may damage the card or the device,
and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may dam-
age the card and the device and corrupt data stored
on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone sup-
ports the USB micro-B cable. You can also charge
your phone from a computer with a USB cable, but
it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is dis-
played.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Get Started
Nokia 4.2
TA-1150/TA-1157 EN
Headset connector
SIM and memory
card slot
Front camera
Earpiece
Volume keys
Power/Lock key
Camera
Flash
Fingerprint
sensor
Microphone
Loudspeaker
USB connector
Google
Assistant/
Google search
key*
*Google Assistant is available in
selected markets and languages.
Where not available Google Assistant
is replaced by Google Search.
To Next Page
Need help?
General
