EN-34
Nokia Thermo
v2.0 | April 2018
Assigning a measurement
Assigning an unassigned measurement
If you’ve taken a measurement using your Nokia Thermo but didn’t assign it right away,
you can do so from the Nokia Thermo app. To do so, perform the following steps:
1. Open the Nokia Thermo app.
2. Tap Assign to��� in the top banner.
It may take a few seconds for this banner to appear in the app as the app needs to
sync with your Nokia Thermo rst.
3. Select the measurement and tap the user prole you want to assign it to.
Reassigning a measurement
If you’ve accidentally assigned a temperature measurement to the wrong user prole, you
can correct this anytime you want. To do so, perform the following steps:
1. Open the Nokia Thermo app.
To Next Page
Loading...