Get started
14
■ Remove the microSD card
You can remove or replace the memory card
without switching the device off, but make
sure that no application is currently
accessing the memory card.
■ Charge the battery
Your battery has been partially charged at
the factory. If the device indicates a low
charge, do the following:
1. Connect the charger to a wall socket.
2. Connect the charger to the device.
3. When the device indicates a full
charge, disconnect the charger from
the device, then from the wall outlet.
You do not need to charge the battery for
a specific length of time, and you can use
the device while it is charging. If the
battery is completely discharged, it may take several minutes before the charging
indicator appears on the display or before any calls can be made.
To Next Page
Loading...
