Your device supports microSD cards with a capacity of up to 8 GB. The size of a single
file must not exceed 2 GB.
Insert the memory card
1 Open the cover of the memory card slot.
2 Insert the card into the memory card slot with the contact surface facing down,
and press until it locks into place.
3 Close the cover of the memory card slot.
Remove the memory card
Important: Do not remove the memory card during an operation when the card
is being accessed. Doing so may damage the memory card and the device, and
corrupt data stored on the card.
You can remove or replace the memory card without switching the device off.
1 Ensure that no application is currently accessing the memory card.
2 Open the cover of the memory card slot.
3 Press the memory card slightly in to release the lock, and remove the card.
10 Get started
To Next Page
Loading...
Need help?
General
