Maintenance
8.46 Overview
8.46.1 Purpose
This chapter describes the maintenance tasks supported by XS-2426G-A ONTs.
8.46.2 Contents
8.46 Overview 148
8.47 Configuring the password 148
8.48 Configuring LOID 150
8.49 Configuring SLID 150
8.50 Managing the device 152
8.51 Backing up the configuration 153
8.52 Restoring the configuration 153
8.53 Upgrading firmware 154
8.54 Rebooting the device 155
8.55 Resetting to factory defaults 156
8.56 Diagnosing WAN connections 157
8.57 Viewing log files 159
8.47 Configuring the password
A
password must adhere to the password rules, which are as follows:
• the password may consist of uppercase letters, lowercase letters, digital numbers, and the
following special characters ! # + , - / @ _ : = ]
• the password length must be from 8 to 24 characters
• the first character must be a digital number or a letter
• the password must contain at least two types of characters: numbers, letters, or special
characters
• the same character must not appear more than 8 times in a row
When the password meets the password rules, the application displays the message “Your
password has been changed successfully”.
When the password does not meet the password rules, the application displays a message to
indicate which password rule has not been followed, for example:
• the password is too short
• the password is too long
Configure a XS-2426G-A indoor ONT
Maintenance
Overview
Nokia ONT
Draft Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
December 2020
148 Issue 1
To Next Page
Loading...
