1 / 12
Luxury PLUS LED Light Kit
FOR Club Car Precedent
INSTALLATION INSTRUCTIONS
NOTE: If a different brand of headlights or taillights was previously installed on your golf
cart, please check that the NOKINS headlights and taillights match the mounting position of
the other brand. Caution, care, and patience are recommended when installing this product
as it involves drilling holes in your shopping cart. Please read through the instructions carefully.
This kit is designed for a 12V operation only.
Technical Support Email: kaladagolf@outlook.com
Technical Support Phone: 586 646 8009 (US Phone)
Tools Needed for Installation
• T15 T30 T40 Torx socket
• 13mm socket
• 10mm wrench
• #2 Phillips Tip
• 15/32” Drill Bit
• 1-1/2” Hole Saw Bit
• Wire Snake
• Rotary Cutting Tool
• Sandpaper
Include：
To Next Page
Need help?
General
