2
3 BEFORE COMMISSIONING
NOTE! The safety instructions in the booklet are marked with this sign. Read these
instructions with particular care.
3.1 MEASUREMENT UNITS
The Installation and Operating Manual, measurement units according to the international SI
measurement system are used.
3.2 DIRECTIONS
In this Installation and Operating Manual, right and left side and front and rear end of the
machine are to be understood in reference to the driving direction.
3.3 SERIAL NUMBER
Write down the serial number of your machine in the space reserved for it end of the booklet.
Be prepared to give the type and serial number of your machine in all enquiries and orders
relating to the machine.
Model: Machine plates number:
Nokka HK 1042P 3TR7965
Nokka HK 3767P LT/HT 3TR7955
Nokka HK 4872P 3TR7958
Nokka HK 4780P 3TR7959
Nokka HK 4970 3TR7960
Nokka HK 4976 3TR7961
Nokka HK 5269 3TR7962
Nokka HK 5282 3TR7963
Nokka HK 6084 3TR7964
To Next Page
Loading...
Need help?
General