nomad TRANS-FLO NTG40 - Temperature Limits

CAUTION – SAFETY POINTS
NTG40 NOMAD TRANS-FLO™
TEMPERATURE LIMITS:
Neoprene -17.8°C to 93.3°C 0°F to 200°F
Buna-N -12.2°C to 82.2°C 10°F to 180°F
EPDM -51.1°C to 137.8°C -60°F to 280°F
Viton
®
-40°C to 176.7°C -40°F to 350°F
Santoprene
®
-40°C to 107.2°C -40°F to 225°F
Polyurethane 12.2°C to 65.6°C 10°F to 150°F
Hytrel
®
-28.9°C to 104.4°C -20°F to 220°F
PTFE 4.4°C to 104.4°C 40°F to 220°F
1
1. Review the NOMAD Chemical Field Guide
for all applications. The information
provided is the “best thinking available”
regarding chemical compatibility. The
guide however, does not provide a
recommendation.
2. Always wear safety glasses during pump
operation. A diaphragm rupture may force
liquid to exit via air exhaust.
3. When handling ammable uids, prevent
static sparking by properly grounding
the pump.
4. Do not exceed 125 psig (8.6 bar).
5. Prior to maintenance, compressed air
line should be disconnected to allow air
pressure to bleed from pump.
6. Tighten all clamp bands and hardware
parts prior to installation. Fittings may
loosen during transportation.