nomon BARCELONA - User Manual

8
1
BARCELONA
Instrucciones de montaje
Assembly instructions
2
Gire cuidadosamente la aguja minutera en el sentido de las agujas del reloj hasta alcanzar
Escanear el código QR para acceder al vídeo de montaje.
las 12:00, continue girando la aguja minutera hasta alcanzar la hora deseada.
ATENCIÓN: Nunca girar en sentido contrario a las agujas del reloj.
o’clock. Then, to set the time, continue to wind the minute hand clockwise until the desired
time is reached.
NEVER wind the minute hand in the anti-clockwise direction.
Scan the QR code to get access to the assembly video.
rivenditore al momento dell’acquisto di una nuova apparecchiatura di tipo equivalente, in
ragione di uno a uno.
riciclaggio, al trattamento e allos maltimento ambientalmente compatible contribuisce ad
dei materiali di cui è composta l’apparecchiatura.
Lo smaltimento abusivo del prodotto da parte dell’untente comporta l’applicazione delle
sanzioni amministrative previste dalla normativa vigente.
Ai sensi dell’art. 13 del Decreto Legislativo 25 luglio 2005, n.151 “Attuazione delle direttive
2002/95/CE, 2002/96/CE e 2003/108/CE, relative alla riduzione dell´uso di sostanze perico-
7
ATENCIÓN:
no olvide colocar la pila de 1,5v.
CAUTION:
don’t forget to set the battery in place.
R6 1,5V
+

Summary

Clock Operation and Setup

Battery Installation Reminder

Ensure the 1.5V battery is correctly installed for clock operation. Do not forget to place the battery.

Setting the Clock Time

Wind the minute hand clockwise to set the desired time. Never wind the minute hand in the anti-clockwise direction.

Accessing Assembly Video

Scan the QR code to access the assembly video tutorial for guidance.

Wall Mounting and Fixture Assembly

Mounting Component Selection

Choose the correct mounting method based on wall type and component configuration, indicated by 'yes' or 'no'.

Central Box and Stick Assembly

Assemble the central box components and screw the metallic stick behind the central box as recommended.

Wall Anchor and Screw Installation

Drill a M6 hole, screw the screw into the anchor, and then fix the anchor to the wall.

Clock Mechanism Fixture

Assemble the clock mechanism by screwing the stick into the anchor, securing it, and attaching the end piece.

Attaching Clock Hands

Securely attach the clock hands to the mechanism, ensuring proper alignment and tension for accurate timekeeping.

nomon BARCELONA Specifications