7
MAINTENANCE & CLEANING
OPERATION
long period of time, as it could cause corrosion or baery
leakage and may result in physical injury and/or property
damage including fire.
1. Remove the cap.
2. Slide the On/Off Switch up to pre-heat the curler. The heating
indicator will illuminate. The temperature indicator will
change colour from green to yellow when the curler is ready
to use.
3. Care fully place the heating head near the base of your lashes
so that the curved tip fits the contour of your lashes, but not
touching your eyelid. Move the heating head upward applying
slight, pressure for 8-10 seconds and then slowly slide it to
the tips of your lashes. Repeat as needed to increase curl.
4. Follow wtih a coat of mascara if desired.
5. When finished, slide the switch down to turn off and replace
the cap.
1. Clean the appliance with a wet cloth or tissue.
2. Do not wash the appliance in water.
GB
To Next Page
Loading...