Need help?Do you have a question about the Noqon NB Series and is the answer not in the manual?
Specifies who can use the product under supervision and safety guidelines.
Highlights critical safety points for correct and safe installation of the Battery Booster.
Lists optional accessories that can enhance the Battery Booster's functionality.
Explains connecting the temperature sensor for the supply battery 'Board I'.
Details using a sensor for accurate battery voltage measurement and compensation.
Describes connecting an external sensor for real-time main battery temperature.
Explains DIP switch settings for lithium battery charging at 0°C.
Describes LED indicators for the main battery voltage status.
Explains LED indicators for battery charge level and charging status.
Details LED indicators for charging, temperature, and overheating.
Explains LED indicators for starter battery voltage and B2B charging.
Describes LED indicators for solar charging voltage status.
Details the operation of the Battery Booster in battery-to-battery charging mode.
Describes the initial charging phase at maximum current.
Explains the phase where voltage is constant, and current decreases.
Details the final stage to maintain battery charge without overcharging.
Explains main battery overvoltage protection and charging interruption.
Describes main battery undervoltage protection and warning signals.
Details protection against low starter battery voltage during B2B charging.
Explains limits on maximum charging current and power for B2B.
Describes charging interruption and resumption based on device temperature.
Explains protection against overvoltage from solar panels.
Details the response to a system voltage error (12V battery > 16V).
Lists conditions excluding liability for damages, like misuse or modifications.
To Next Page
General