To Next PageTo Next Page
Need help?Do you have a question about the NORAUTO E-FIT 200-2 and is the answer not in the manual?
General| Brand | NORAUTO |
|---|---|
| Model | E-FIT 200-2 |
| Category | Automobile Accessories |
| Language | English |
Towable bicycle rack, 17.3 kg weight, 2x30 kg max capacity.
Details on weight and maximum load capacity for the bicycle rack.
Read and follow all warnings and instructions for safe use and warranty.
Follow usage instructions, check towbar/vehicle/bike compatibility.
Comply with traffic laws, ensure visibility, adapt speed, avoid hazards.
Verify lighting, secure items, check straps, and monitor vehicle handling.
Clean with mild products, replace defective parts, and store properly.
Avoid poor roads, sudden acceleration/braking, and drive smoothly.
For transporting up to 2 bicycles, compatible with e-bikes, max 60kg.
Ensure towbar 'S' load capacity meets minimum requirements.
Adhere to road traffic regulations and ensure visibility of lights and license plates.
Note towbar D-value requirements for safe operation.
Adjust driving due to altered vehicle dynamics and ensure rear visibility.
Ensure rear lighting is functional and visible, may require repeaters.
List of included parts for bicycle rack assembly.
First steps in assembling the bicycle rack components.
Steps to secure the main mechanism of the bicycle rack.
Instructions for locking the assembled rack mechanism.
Steps for mounting the bicycle rack onto the vehicle's towbar.
Tightening bolts and securing the rack arm to the towbar.
Tightening bolts to specified torque (45Nm).
Instructions for securing the clamp that holds the bicycle frame.
Connecting the 13-pin or 7-pin electrical plug to the vehicle.
Locking the main assembly to the towbar for security.
Instructions for securing the arms that hold the bicycles.
Attaching and locking the individual holders for the bicycles.
Ensure bikes are correctly oriented for mounting.
Securing up to two bicycles with a max weight of 60kg.
Adjusting and locking the clamp to fit bicycle frames securely.
Check compatibility and secure bicycle wheels in their holders.
Specific instructions for securing carbon frames and other bicycle parts.
Final tightening of the frame clamp (10Nm).
Securing bicycle wheels and frame with straps.
Lock mounts and use straps for secure bicycle transport.
Operate mechanism to tilt rack for easy trunk access.
Step-by-step tilting and re-securing the rack after trunk access.
Release locks and detach the rack from the towbar.
Remove holders and disconnect the electrical plug.
Release levers and prepare rack for storage.
