To Next PageTo Next PageHow to fix a NORAUTO NS-202 BT that won't turn on?
If your NORAUTO Car Receiver won't switch on, first ensure your car ignition is turned on. Next, check the cable connections to make sure they are properly connected. Finally, inspect the fuse and replace it with a new one of the same capacity if it's burnt.
Why is there no sound coming from my NORAUTO NS-202 BT?
If there is no sound from your NORAUTO Car Receiver, verify that the volume isn't set to the minimum or that the mute function is not activated. Adjust the volume or deactivate the mute function.
What to do if my NORAUTO Car Receiver is unable to receive stations?
If you are unable to receive stations on your NORAUTO Car Receiver, the antenna might not be connected properly. Ensure that the antenna is correctly connected.
How to improve poor radio reception on NORAUTO NS-202 BT Car Receiver?
If the quality of the radio station reception is poor on your NORAUTO Car Receiver, it could be due to the antenna not being fully extended or being broken. Fully extend the antenna and, if it's broken, replace it with a new one.
What to do if my NORAUTO NS-202 BT Car Receiver screen freezes?
If your NORAUTO Car Receiver unit or screen isn't functioning normally, the system might be unstable. Press the RESET button.
Why does my NORAUTO NS-202 BT keep losing preset stations?
If preset stations are lost on your NORAUTO Car Receiver, the battery cable might not be properly connected. Connect the permanent live on the unit to the permanent live on the vehicle.
What to do if I can't insert a USB device into my NORAUTO NS-202 BT?
If you are unable to insert a USB device into your NORAUTO Car Receiver, the USB device might have been inserted the wrong way round. Try inserting it the other way around.
Why can't my NORAUTO NS-202 BT read my USB device?
If the USB device cannot be read by your NORAUTO Car Receiver, the NTFS format might not be supported. Check that the USB file system is in FAT or FAT32 format.
General| Brand | NORAUTO |
|---|---|
| Model | NS-202 BT |
| Category | Car Receiver |
| Language | English |
Detailed wiring diagram showing connections and pin definitions for the audio unit.
Details on the unit's capability to play WMA and MP3 audio files.
Information regarding the playback of WMA files, including trademark details.
Licensing information for private, non-commercial use of MP3 playback.
Numbered list detailing the function of each button and control on the unit's panel.
Instructions on how to turn the unit on using the power button.
How to turn the unit on/off and adjust the volume level using the knob.
Using the MUTE button and switching between Radio, USB, A2DP, or AUX modes.
Guide to adjusting sound effects like EQ, Balance, Fader, and Loudness.
How to switch between FM/MW bands and tune stations using seek buttons.
Automatically storing up to six radio stations for quick access.
Steps for inserting and safely removing USB storage devices.
Information on USB file systems, naming conventions, and device compatibility.
Handling Digital Rights Management (DRM) and precautions for creating MP3/WMA files.
Guidelines for adding correct file extensions and logical folder/file naming.
Instructions for pausing, resuming, track-up/down, fast-forward/reverse playback.
How to navigate and select folders containing MP3/WMA files for playback.
Accessing track lists and searching for specific songs or files by number.
Methods for searching and selecting folders or files within the media.
Resets playback to the first track of the current folder or the entire media.
Explanation of Scan play, Repeat play, and Random play functions.
Instructions for removing and reinstalling the unit's detachable front panel for security.
Steps for safely removing the main unit from the dashboard using removal keys.
Step-by-step guide to connecting your mobile phone via Bluetooth.
How to answer incoming calls and end calls using the unit.
Streaming audio from a Bluetooth device and controlling playback.
Explanation of the Advanced Audio Distribution Profile (A2DP) for stereo audio.
Troubleshooting and important considerations for successful Bluetooth connectivity and usage.
Guidance on establishing connections and making phone calls via Bluetooth.
Explanation of Radio Data System features like AF and PS.
How to enable/disable AF and REG modes for station tuning.
Automatic clock time adjustment and traffic announcement handling.
Receiving program type information from FM stations.
Accessing and adjusting settings like AF, TA, REG, DX/LO, and Scroll.
Changing between 12/24 hour format and configuring auto answer settings.
Procedure for setting the device's clock time.
Specifications for the dashboard opening needed to install the unit.
Step-by-step instructions for physically installing the car radio unit.
How to reset the unit to its original status using the reset button.
Solutions for common problems related to power, sound, and unit functionality.
Troubleshooting steps for tuner reception and USB device read errors.
Technical details including power supply, output, dimensions, and weight.
Detailed technical specifications for FM and AM radio reception.
List of included components such as mounting sleeve, screws, and keys.
