Need help?Do you have a question about the Noraxon Ultium EMG and is the answer not in the manual?
General| Brand | Noraxon |
|---|---|
| Model | Ultium EMG |
| Category | Laboratory Equipment |
| Language | English |
Details the foot contact sensor lead with FSRs, its use in gait analysis, and compatibility with the Ultium EMG system.
Specifies that the Ultium system is contraindicated for individuals with implanted pacemakers.
Explains international icons and symbols used in the manual and on device enclosures.
Provides definitions for key terms like Ultium Sensor, Ultium SmartLead, and Multi-Channel Sensor.
Identifies the specific model and part numbers for the Footswitch SmartLead and associated sensor assembly.
Outlines product versions and necessary system configurations, including the Ultium EMG Sensor and Receiver.
Discusses the benefits of objective movement assessment and confirms no identified risk of physical harm from the device.
Summarizes critical safety precautions including contraindications for pacemakers and use with MRI or defibrillation.
Directs users to the hardware manual for the appropriate EMG system for initial setup instructions.
Illustrates and identifies the Footswitch SmartLead, sensor assembly, and insoles with their respective part numbers.
Details the inputs, outputs, and status indicators of the EMG Sensor, including connectors, LEDs, and power buttons.
Provides step-by-step instructions for connecting the Footswitch SmartLead to the FSA1 connector or Ultium Insole connector.
States that no specific driver installation is required as communication occurs via the USB port.
Guides the user through installing the MR3 companion software, including inserting the feature map and following on-screen prompts.
Explains how to configure the companion software to recognize system components, particularly the Footswitch SmartLead via serial number.
Details the MR3 hardware setup process, including detecting sensors and adding the SmartLead to the sensor list.
Describes the 'Find My Sensor' feature within MR3 for locating specific Ultium sensors by making them blink.
Explains the sensor's STATUS LED indicators and outlines a quick testing procedure for the Footswitch SmartLead.
Reiterates critical safety practices, emphasizing precautions related to pacemakers and medical devices.
Details methods for securing Footswitch SmartLeads using adhesive tape or elastic straps for patient attachment.
Covers FSR placement, adjustability, sizes, and replacement, advising on taping sensors to the foot.
Describes the Foot Insole for pressure measurement, its adjustability, and available sizing options for different users.
Explains how the Footswitch SmartLead displays and records signals when connected to a PC via companion software.
Directs users to the hardware manual for troubleshooting potential error messages encountered with the system.
Provides step-by-step instructions for powering down the system at the end of the day.
Offers guidance on proper storage and protection of sensors when not in use or during travel.
Emphasizes safety by recommending specific cleaning agents and warning against immersing sensors in liquids.
Details the user-level cleaning procedures for Footswitch FSRs and insoles using a damp cloth.
Explains the process for updating device firmware via MR3, including pre-update checks and requirements.
Specifies that certain maintenance tasks should only be performed by trained technical personnel.
Guides users on performing updates for the companion software, including data backup and installation steps.
Highlights the critical requirement to fully charge all EMG sensors before initiating a firmware update.
Provides links to Noraxon's website for frequently asked questions and additional technical support resources.
Details the 1-year warranty coverage for Noraxon equipment and conditions under which it is voided.
Instructs users on how to submit technical support requests, including required information and online submission.
Outlines the procedure for returning equipment for service, including obtaining an RMA number and shipping instructions.
States that there are no consumable items available for this specific product.
Lists replaceable parts such as FSR sensors, insoles, and elastic straps with their respective part numbers.
States the expected usable life of the Footswitch SmartLead is seven years.
Details the technical specifications of the SmartLead, including input types, sample rates, output ranges, and physical properties.
Specifies the acceptable environmental conditions for storing and transporting the product.
Provides essential tips for handling, using, and caring for Force Sensitive Resistors (FSRs).
Describes various methods for correctly placing FSRs on the foot, inside shoes, or in slippers for optimal performance.
Explains the use of medical tape for securing FSRs and ensuring proper vent hole functionality.
Details the FSR connector's design for easy replacement and provides guidance on handling bent pins or cable damage.
Presents insole dimensions and a comprehensive size chart for men, women, and children.
Guides on adjusting Footswitch SmartLead sensitivity thresholds and troubleshooting common indicator light issues.
Translates foot contact pressures into voltage readings for individual sensor locations and combined step sequences.
To Next Page
