To Next Page
M
Megan HarrisAug 5, 2025
Why is my Norcool Accessories unit not cooling enough?
- CChristie BartlettAug 5, 2025
If your Norcool Accessories unit isn't cooling sufficiently, there are several potential causes: * The controller set point might be too high. Try adjusting it to a lower value. * The ambient temperature might be too high. Reduce the temperature in the room on the unit's warm side, and ensure airflow isn't obstructed. * The ambient temperature might be too low. Increase the room temperature on the unit's warm side. * The door may not be sealed or closed properly. Check the door to ensure it is sealed and closed. * The condenser might be blocked by dust. Remove and clean the dust filter. * The evaporator might be iced up. Switch off the unit to defrost it.
General