EasyManua.ls Logo

Nord Drivesystems SK 11382 User Manual

Nord Drivesystems SK 11382
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Intelligent Drivesystems, Worldwide Services
B1000
Operating and Maintenance Instructions for
Gear Units and Geared Motors
GB
DRIVESYSTEMS
0
Question and Answer IconNeed help?

Do you have a question about the Nord Drivesystems SK 11382 and is the answer not in the manual?

Nord Drivesystems SK 11382 Specifications

General IconGeneral
BrandNord Drivesystems
ModelSK 11382
CategoryEngine
LanguageEnglish

Summary

1. Important Notes

1.4 Safety Information

Crucial safety instructions for handling and installation of gear units.

1.2 Safety and Information Symbols

Explains safety and informational symbols used throughout the manual.

1.3 Correct Use Guidelines

Defines the intended purpose and application of the gear units.

2. Gear Unit Description

2.1 Type Designations and Gear Unit Types

Details the various classifications and model designations of gear units.

2.2 Type Plate Explained

Explains the information presented on the gear unit's identification plate.

3. Storage, Preparation, and Installation

3.3 Preparing for Installation

Steps and checks required before installing the gear unit.

3.4 Installing the Gear Unit

Procedures and guidelines for the correct installation of the gear unit.

3.7 Fitting Shrink Discs

Instructions for the proper installation of shrink discs for shaft mounting.

3.9 Fitting a Standard Motor

Steps for mounting a standard electric motor to the gear unit.

4. Commissioning Procedures

4.1 Checking the Oil Level

Procedure for verifying the lubricant level prior to initial operation.

4.2 Activating Automatic Lubricant Dispenser

Steps to activate the integrated automatic lubricant dispenser.

5. Service and Maintenance

5.1 Service and Maintenance Intervals

Schedule detailing routine checks and maintenance tasks for gear units.

5.2 Service and Maintenance Work

Detailed descriptions of specific maintenance procedures to be performed.

6. Appendix

6.3 Troubleshooting Guide

A guide for diagnosing and resolving common operational faults and issues.

6.4 Lubricant Recommendations

Comprehensive table of recommended lubricants for various operating conditions.

6.2 Torque Values

Table specifying correct torque settings for different bolt sizes and classes.

Related product manuals