Need help?Do you have a question about the Nord Drivesystems SK 33100 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Protection class | IP55 |
| Voltage | 400 V |
| Efficiency class | IE3 |
| Ambient temperature | -20°C to +40°C |
| Altitude | Up to 1000 m |
Covers manual reading, safety symbols, correct usage, and critical safety information.
Lists related documents and explains disposal procedures.
Lists gear unit types and explains the rating plate information.
Guidelines for short-term and long-term storage of gear units.
Steps to prepare the drive unit before installation, including vent plug.
Instructions and safety precautions for installing the gear unit.
Procedures for fitting hubs and push-on gear units onto shafts.
Step-by-step guide for fitting shrink discs.
Procedures for fitting covers and installing standard motors.
Precautions for painting and fitting the cooling coil.
Procedures for checking oil level and activating lubricant dispenser.
Covers cooling operation, running-in, and a final commissioning checklist.
Outlines service intervals, tasks, and initial inspection procedures.
Covers oil level checks, regreasing, dispenser replacement, and oil changes.
Details on complete dismantling and overhaul of gear units.
Explanation of symbols used for different gear unit versions.
Lists national and international sales and service offices.
To Next Page