Need help?Do you have a question about the Nord Drivesystems SK 5407 and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Motor Power | 0.12 - 45 kW |
| Power | 0.12 - 45 kW |
| Voltage | 400 V |
| Efficiency class | IE3 |
| Mounting | Flange |
Covers crucial safety instructions for handling, installation, and operation.
Covers essential preparation steps before installing the gear unit.
Provides detailed instructions and safety warnings for installing the gear unit.
Details on installing IEC and NEMA motors with adapters, including weight limits.
Instructions for fitting gear units with hollow shafts and specific fastening elements.
Instructions for installing flange-mounted gear units and associated requirements.
Guidelines for mounting motors using base frames and swing bases.
Instructions for using the motor mount option and related checks.
Procedures for checking the oil level and ensuring proper venting before operation.
Commissioning steps for gear units with lubricant circulation systems.
Commissioning procedures for gear units with fan cooling.
Steps for commissioning the internal cooling system.
Commissioning procedures for external oil/air and oil/water cooling systems.
Instructions for commissioning the oil heater and its temperature monitoring.
Details on commissioning and monitoring oil temperature with PT100 sensors.
Commissioning guidelines for backstop and freewheeling coupling options.
Procedures for checking the gear unit during and after a test run.
Defines the recommended intervals for various service and maintenance tasks.
Details the specific tasks involved in servicing and maintaining the gear unit.
Procedures for checking and correcting the oil level in the gear unit.
Detailed procedure for draining and refilling the gear unit with oil.
Table of specified tightening torques for various screw connections.
Permissible tolerances for the straightness and flatness of bolting surfaces.
Guidance for identifying and resolving common gear unit malfunctions.
Information on how to handle repairs and contact the service department.
To Next Page