Need help?Do you have a question about the nord Electro 5D 73 and is the answer not in the manual?
General| Brand | nord |
|---|---|
| Model | Electro 5D 73 |
| Category | Music Equipment |
| Language | English |
Expresses gratitude for purchasing the Nord Electro 5 instrument.
States trademarks are properties of their owners and not affiliated with Clavia AB.
Explains the Nord Electro 5 is bi-timbral, allowing two separate sounds simultaneously (Part Lower, Part Upper).
Describes Program names, numbers, and how programs store settings for all parameters.
Details the process of saving and naming new or edited Programs.
Explains Live Programs, which are automatically stored, and how to select them.
Describes how to save Live sounds to Programs and copy Programs to Live Programs.
Details the Organ model, drawbars, and tone wheel simulation.
Explains how each Program can store two different drawbar settings and Vibrato/Chorus/Percussion states.
Describes options for using actual drawbar positions and syncing them to presets.
Details various organ sound models like B3, Pipe, VX, and Farf, including percussion.
Covers the Piano engine, its sound types, and the Long Release effect.
Explains piano features like String Resonance, Mono playback, and Keyboard Touch response.
Details the Sample Synth engine, including Dynamics, Filter Velocity, and envelope settings.
Introduces the Effects section, detailing insert effects, EQ, and global reverb.
Describes modulation effects (Tremolo, Phaser, Flanger, Chorus, Vibe) and amp/drive effects.
Details the Rotary speaker simulation and the stereo Delay effect.
Details the EQ section and explains the Reverb as a global room simulator effect.
Describes how to enter Set List mode and select Programs for songs.
Details the process of storing Songs and Set Lists, including naming.
Describes how to save edited Programs directly from Set List mode.
Introduces List View mode for browsing and navigating Programs, Set Lists, Pianos, and Samples.
Details how to scroll through Programs and Set List entries using List View.
Describes using List View to see a list of piano sounds and scrolling through them.
Explains how to use List View to see a list of available samples.
Describes the ORGANIZE function for moving Programs and Songs within Banks.
How to use the Nord Electro 5 as a controller keyboard for external sound modules.
Sending MIDI from the upper part of the keyboard in KB Split mode to external gear.
Receiving MIDI on Part Upper from an external keyboard to play Nord sounds.
Setting up the Nord Electro 5 with a sequencer for controlling synths or recording MIDI.
Details global system settings like Memory Protect, Transpose, Fine Tune, and Pedal settings.
Covers MIDI settings like Local Control, Channel Global, Receive channels, and Program Change modes.
Describes sound-related settings for Piano, B3, and Rotary effects.
Lists the system requirements for installing and running the Nord Sound Manager software.
Provides instructions for downloading and installing the Nord Sound Manager application.
Offers a general overview of the Nord Sound Manager interface and its main areas.
Explains how to download and transfer sounds and samples from www.nordkeyboards.com.
Details the process of downloading and transferring piano sounds using the software.
Describes how to download and transfer sample synth samples using the software.
Explains how to delete sounds and samples from the instrument via the software.
Covers substituting sounds or samples to keep programs intact.
Explains how to back up and restore the entire Nord Electro 5 instrument.
Describes uploading and downloading individual programs, pianos, or samples.
Details uploading and downloading bundled programs, sounds, and samples.
Provides a general guide on making audio connections to the instrument.
Describes the 1/4 inch stereo headphone jack output.
Details the unbalanced line level outputs for left and right audio channels.
Explains the 1/8 inch jack for connecting external audio devices for practice.
Covers the MIDI IN and MIDI OUT connections for data transfer.
Describes the USB port for computer connection, OS updates, and software.
Details the connectors for Sustain, Rotor, and Control pedals.
Important notice regarding modifications, cable use, and FCC compliance for USA users.
States compliance with Canadian ICES-003 for Class B digital apparatus.
Provides compliance information statement for the Nord Electro 5D and 5HP models.
To Next Page
