Need help?Do you have a question about the Norden EYENOR and is the answer not in the manual?
General| Category | Network Hardware |
|---|---|
| Model | EYENOR |
| Type | NVR |
| Resolution Support | Up to 8MP |
| Operating System | Embedded Linux |
| Channels | 8/16/32 |
| HDD Slots | 4 |
| Compression | H.265/H.264 |
| Network Interface | 10/100/1000Mbps |
| Operating Temperature | -10°C to +55°C |
| Humidity | 10% to 90% |
Describes local operations using monitor and mouse.
Explains mouse button functions for NVR interaction.
Describes functions of physical buttons on the NVR.
Steps to prepare for NVR installation and setup.
Describes the initial setup wizard for NVR configuration.
Explains icons indicating camera status in live view.
Icons for controlling live view windows and camera operations.
Adds and manages IP cameras, including search and connection status.
Configures fisheye cameras for specific viewing modes.
Interface for controlling PTZ cameras and managing their settings.
Saves and recalls specific PTZ camera positions and settings.
Configures video compression, resolution, and bitrate for streams.
Configures recording and snapshots triggered by motion detection events.
Plays back the last 5 minutes and 30 seconds of recorded video.
Searches and plays recordings by specifying camera and date.
Backs up video recordings from the NVR to a USB storage device.
Backs up captured snapshots or images from the NVR.
Configures alarm inputs and outputs for external device integration.
Detects and triggers actions based on movement within camera views.
Searches for recordings triggered by VCA events like intrusion or cross-line detection.
Searches for recordings based on detected human faces.
Sets basic network parameters like IP address and subnet mask.
Configures port mapping (UPnP or Manual) for external access.
Configures system time, date formats, and time synchronization.
Manages user accounts, groups, and permissions.
Views NVR basic information, firmware, and operation status.
Performs S.M.A.R.T. tests to check hard disk health.
Prerequisites and system requirements for web access.
Steps to log in to the NVR via a web browser.
Basic LAN setup connecting NVR, cameras, and PC.
Setup with surveillance management software.
To Next Page