ENG
Installation
Warning: before using the device, keep it upright for at least two hours.
The device should be kept in the upright position and placed on a flat surface. Do not install or use it in the bathroom
or other humid environments.
Connect the ventilation pipe to the two plastic adapters. Extend the pipe and rotate them together.
Connect the assembled pipe to the air ventilation (6.) of the device.
Open the window, mount the window kit (14.) to the window. Can be mounted horizontally or vertically. Adjust the
window kit to fit into the window frame, screw and fixate the parts.
The distance between the product and walls or other objects must be least 50 cm.
Elongate the ventilation pipe and connect it to the hole of the window kit.
To Next Page
Loading...
Need help?
General
