NordicTrack NTST00890

To Next Page

Congratulations! By purchasing the NordicTrack

Mini Stepper you have taken

the first step toward enhancing your physical fitness. Your Mini Stepper is

designed to provide you with all the benefits of a low-impact cardiovascular

workout in the convenience of your home. The Mini Stepper is compact and

portable, perfect for use almost anywhere.

BEFORE YOU BEGIN

For your safety and benefit, carefully read these

instructions before using the Mini Stepper.

If you

have questions, or if there are missing or damaged parts,

we will guarantee complete satisfaction through direct

assistance from our factory. Please call our Customer

Service Department toll-free at

1-888-825-2588, Monday

through Friday, 6 a.m. until 6 p.m. Mountain Time (exclud-

ing holidays).

ASSEMBLY

Set all parts of the Mini Stepper in a cleared area and

remove the packing materials. Do not dispose of the

packing materials until assembly is complete. No tools

are required for assembly.

1. Your NordicTrack

Mini Stepper workout monitor is

easy to install. You will need two 1154 watch batter-

ies.

Using a coin, pry open the monitor as shown

below. Lift the back off the monitor.

Next, turn the 1154 watch batteries so the positive

(+) sides are facing up and insert them into the bat-

tery clips. Snap the monitor back together.

2. Press the two posts on the back of the monitor into

the holes in the center of your Mini Stepper as

shown below.

Battery

Clips

Model Number NTST00890 NordicTrack

is a registered trademark of ICON Health & Fitness, Inc.

Need help?

Do you have a question about the NordicTrack NTST00890 and is the answer not in the manual?

Summary

Before You Begin

Customer Service Contact

Contact customer service for questions or assistance with missing or damaged parts.

Assembly Instructions

Monitor Installation

Install the workout monitor by opening it with a coin and attaching it to the stepper.

Monitor Operation

Display Modes

Monitor displays elapsed time up to 99:59 minutes and steps up to 9,999.

Auto On;Off Function

Monitor automatically activates with stepper motion and shuts off after inactivity.

Reset and Power Control

Use the RESET/OFF button to reset the monitor to zero or turn it off.

Using the Monitor

Turn on by pressing RESET/OFF or stepping; monitor scans modes in 5-second intervals.

Important Precautions

Safety Warnings

Read all instructions, use on a level surface, keep children and pets away, and stop if in pain.

Limited Warranty

Warranty Terms

Product is warranted for 90 days against defects; repairs at ICON's option.