EasyManua.ls Logo

Nordmende NM451IX - Turntable Installation; Installation Requirements

Nordmende NM451IX
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hub (underside)
tray should never be restricted.
c. All food and containers of food are always placed
breaks, contact your
nearest authorized service
centre
.
Turntable Installation
Turntable shaft
a. Never place the
enamel tray
upside down. The enamel
on the
enamel tray
for cooking.
d. If
enamel tray
cracks or
Enamel tray
b.
always be used during cooking.
must
The
enamel tray
Important information about installing
This appliance is NOT intended for use in a commercial
environment.
• Please observe the installation instructions provided and
note that this appliance should only be installed by a qualified
technician.
The appliance is fitted with a plug and must only be
connected to a properly installed earthed socket.
• In case a new socket is needed, installation and cable
connection must only be done by a qualied electrician.
If the plug is no longer accessible following installation,
a pole disconnecting device must be present on the
installation site with a contact gap of at least 3 mm.
Adapters, multiway strips and extension cords must not be
used. Overloading can result in fire.
The accessible surface may be hot during operation.
11

Related product manuals