M
Melinda WalkerAug 3, 2025
Why won't the Nordson ASYMTEK Spectrum tilt mechanism tilt in all directions?
- LLauren HubbardAug 3, 2025
If the Nordson ASYMTEK Dispenser's tilt mechanism isn't tilting in all directions, the pneumatic regulator on the side of the bulkhead might be set incorrectly. To resolve this, go to the I/O window (see 6.2 I/O Test) to toggle each tilt bit independently. After toggling open the hatch, try to rotate the tilt mechanism by hand. The force applied to each direction should be about equal. Adjust the regulator on the side of the Z head to adjust the pressure. Pressure to the black and blue ports for the tilt should be about 60 psi.

